
Town 'n' Country Cabinet Refacing
Cabinet Refacing in Town 'n' Country, FL
Cabinet refacing in Town 'n' Country: new doors, veneer, and hardware over your existing boxes. Free estimates, honest pricing.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Town 'n' Country and nearby communities.
Old cabinet boxes don't always need to go in a dumpster. If the frames are square and the plywood underneath hasn't swelled, refacing gets you new doors, drawer fronts, and matching veneer on the exposed surfaces, without tearing the kitchen down to studs.
Town 'n' Country Cabinet Refacing handles the whole job: assessment, material selection, surface prep, and install. A lot of homes here were built in the 1960s through 1980s, and those older plywood and particleboard boxes are usually solid enough to reface rather than replace outright.
What's included
What's included with Cabinet Refacing
Typically included
- Box inspection for moisture damage, warping, and structural soundness
- New veneer applied to all visible cabinet box surfaces
- New doors and matching drawer fronts
- Standard hardware installation (hinges, pulls)
Optional
- Soft-close hinge and slide upgrades
- Crown molding addition
- Custom door profiles for odd-sized openings
Customer prep
- Clear out cabinet contents before the crew arrives
- Note any cabinets with existing damage you want flagged during the walkthrough
Want a clearer scope?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and methods for Cabinet Refacing
Material choice matters more here than people expect. Humidity works on cabinets year-round in this part of Florida, so adhesion and moisture resistance drive what we recommend.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance that holds up against daily humidity swings.

Wood Veneer
Natural wood veneer gives an authentic grain look over existing boxes, a good match for the solid-wood construction common in older Town 'n' Country kitchens.

Adhesive Bonding Agents
Professional-grade adhesives keep veneer and laminate bonded long-term, which matters when Tampa Bay humidity is working against the glue line.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design.

Edge Banding
Edge banding finishes exposed panel edges so nothing looks unfinished once the doors go on.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCost
What does cabinet refacing cost in Town 'n' Country?
Costs scale with linear footage and the materials you pick, not square footage of the room. Here's roughly where most jobs land: These are ballpark ranges, not a quote. Contact for a free estimate based on your kitchen.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only refresh | $2,500–$5,000 | new doors and drawer fronts, existing boxes left as-is. |
| Standard full refacing | $5,000–$10,000 | veneer on all boxes plus new doors, drawer fronts, and hardware. |
| Premium refacing | $10,000–$16,000+ | upgraded wood veneer, soft-close hardware, and custom door profiles. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Cabinet Refacing
Town 'n' Country is unincorporated Hillsborough County, so anything that does trigger a permit routes through the county building office, not a city hall. Verify specifics with the county before work starts.
| Typically needs a permit | Often no permit |
|---|---|
| Electrical outlet relocation during the job | Door and drawer front swaps |
| Structural removal or replacement of cabinet boxes | Veneer application over existing boxes |
| — | Hardware upgrades |
| — | Molding addition |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Swapping knobs and pulls on existing doors | Veneer adhesion in a humid climate, where bonding failures show up months later |
| Minor touch-up painting on trim | Box assessment to catch hidden moisture damage before quoting |
| Cleaning and degreasing cabinet surfaces before a pro visit | Hinge boring and precise door alignment |
| — | Custom door fabrication for non-standard openings |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and after Cabinet Refacing

Before 
After
FAQs
Cabinet Refacing FAQs
Is cabinet refacing actually cheaper than replacing cabinets?
Usually, yes. Refacing reuses your existing boxes and only replaces doors, drawer fronts, and surface veneer, which is typically 30-50% less than a full cabinet replacement.
How do I know if my cabinet boxes are solid enough to reface?
A technician checks for warping, water damage, and loose joints during the initial visit. Plywood boxes from the 1960s-80s are usually fine. Particleboard that's swollen or crumbling is a sign to discuss replacement instead.
Will refaced cabinet doors match my existing cabinet boxes?
Yes. Veneer and finish are matched to the new door material during the design consultation, so the box and door read as one continuous surface.
Do refaced cabinets hold up in Florida humidity?
With the right adhesive and a moisture-resistant veneer or thermofoil, yes. That's why material selection matters more here than in drier climates.
What's a fair price per linear foot for cabinet refacing?
Most Tampa-area jobs run somewhere between $100 and $250 per linear foot depending on door material and box condition.
Next step
Get a Cabinet Refacing estimate in Town 'n' Country
Call (727) 349-3376 or request a free estimate through the contact form. We'll look at your boxes before quoting anything.
---
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Town 'n' Country: new doors, veneer boxes, soft-close upgrades. Free estimates, straight pricing.

Bathroom Vanity Refacing
Bathroom vanity refacing in Town 'n' Country: moisture-resistant doors, veneer, and sealant. Free estimates for one vanity or several.

Cabinet Door Replacement
Cabinet door replacement in Town 'n' Country matches new doors to existing boxes for a fast, affordable kitchen refresh. Free estimates.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.