
Town 'n' Country Cabinet Refacing
Commercial Cabinet Refacing in Town 'n' Country, FL
Commercial cabinet refacing in Town 'n' Country with durable materials and scheduling built around business hours. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Town 'n' Country and nearby communities.
Commercial Cabinet Refacing covers break rooms, reception desks, medical offices, and retail counters where cabinet boxes still work but doors and surfaces are worn from daily traffic. Instead of ripping out millwork and closing a space for weeks, Town 'n' Country Cabinet Refacing resurfaces existing boxes with commercial-grade laminate and swaps in new doors, drawer fronts, and reinforced hardware built for repeated use.
Most commercial clients care about two things: minimal downtime and materials that hold up. We schedule around business hours when possible and spec hardware rated for higher cycle counts than a typical residential kitchen sees.
What's included
What's included with Commercial Cabinet Refacing
Typically included: site evaluation, commercial-grade laminate resurfacing, new doors and drawer fronts, reinforced hinges and heavy-duty slides, final compliance walkthrough.
Optional: antimicrobial surface coating, impact-resistant panel upgrades, after-hours or weekend install scheduling.
Customer prep: clear countertops and remove contents from cabinets being refaced, confirm access hours with staff or property management.
Want a clearer scope?
Get a Free EstimateHow it works
How our Commercial Cabinet Refacing process works
Step 1Site Evaluation
Commercial spaces are assessed to plan refacing around daily operations.
Step 2Scheduling Coordination
Work is scheduled to minimize disruption to business activities.
Step 3Durable Material Selection
Commercial-grade materials are chosen for high-traffic durability needs.
Step 4Box and Surface Prep
Cabinet boxes are prepared to withstand frequent commercial use.
Step 5Refacing Installation
New surfaces, doors, and hardware are installed across commercial cabinetry.
Step 6Compliance Check
Finished work is reviewed to ensure it meets commercial use standards.
Materials
Materials and methods for Commercial Cabinet Refacing
Commercial spaces take more daily wear than a residential kitchen, so material choice leans toward reinforced and impact-rated products rather than standard residential grade.

Commercial-Grade Laminate
Heavy-duty laminate withstands frequent use and the humidity swings common in Hillsborough County commercial buildings.

Reinforced Hinges
Reinforced hinges handle increased daily use in commercial settings without sagging.

Impact-Resistant Panels
Panels resist dents and damage common in high-traffic areas like break rooms and reception counters.

Heavy-Duty Drawer Slides
Slides support frequent, repeated use in commercial cabinetry without binding.

Antimicrobial Surface Coating
Coatings help reduce surface bacteria in medical and food-service applications.

Commercial Hardware Sets
Durable hardware sets are built for long-term commercial performance under daily use.
Questions on materials?
Get a Free EstimateTimeline
How long does commercial cabinet refacing take?
Timeline depends on square footage and whether work happens during or after business hours.
- 01
Site evaluation
same day - 02
Material lead time
1–2 weeksordering commercial-grade laminate and hardware
- 03
Install
2–5 daysscope
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for Commercial Cabinet Refacing
Refacing itself generally doesn't trigger a permit, but commercial spaces sometimes have separate inspection requirements tied to occupancy type. Since Town 'n' Country is unincorporated, anything beyond cosmetic refacing routes through Hillsborough County rather than a city building department. Always confirm specifics with Hillsborough County before scheduling work in a commercial unit.
| Typically needs a permit | Often no permit |
|---|---|
| Electrical outlet relocation behind cabinetry | Door and drawer front replacement |
| Structural changes to built-in cabinet runs | Laminate resurfacing of existing boxes |
| — | Hardware upgrades |
Need help with permits?
Get a Free EstimateCost
What does commercial cabinet refacing cost in Town 'n' Country?
Commercial pricing scales with linear footage and material grade rather than per-room averages. Request a free estimate for an exact number based on your floor plan. #### DIY ####
| Project type | Typical range | What’s included |
|---|---|---|
| Small counter or break room run | $1,500-$4,000 | laminate resurfacing and new doors on a short cabinet run. |
| Mid-size office or retail buildout | $4,000-$10,000 | full reface with reinforced hardware across multiple runs. |
| Large commercial space | $10,000+ | multi-area refacing with antimicrobial coating and heavy-duty slides. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateWhen to call
When to call for Commercial Cabinet Refacing
Call (727) 349-3376 or request a free estimate to get a scope and schedule that fits your business.
- Cabinet doors in a break room or reception area are chipped or delaminating
- You're renovating a commercial space and want to avoid a full millwork teardown
- Daily wear has outpaced residential-grade hardware and hinges are failing
Seeing warning signs?
Get a Free EstimateFAQs
Commercial Cabinet Refacing FAQs
How much does commercial cabinet refacing cost in Town 'n' Country?
Pricing runs from roughly $1,500 for a small counter run to $10,000+ for a full multi-area buildout, based on linear footage and material grade.
How long does commercial refacing take?
A small run can finish in 2-3 days; larger spaces with multiple cabinet runs typically take 3-5 days.
Can work happen outside business hours?
Scheduling around operating hours is common for commercial clients and can be arranged during your estimate.
Do commercial jobs need a permit?
Usually not for refacing itself. Electrical or structural changes behind cabinetry may require county permitting.
What materials hold up best in high-traffic commercial spaces?
Commercial-grade laminate, reinforced hinges, and heavy-duty drawer slides are the standard choice for daily wear.
Is DIY an option for commercial cabinets?
Minor hardware swaps are fine. Resurfacing and door replacement across a commercial run is better handled by a pro to avoid visible seams and hardware failure.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Town 'n' Country: new doors, veneer, and hardware over your existing boxes. Free estimates, honest pricing.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Town 'n' Country: new doors, veneer boxes, soft-close upgrades. Free estimates, straight pricing.

Bathroom Vanity Refacing
Bathroom vanity refacing in Town 'n' Country: moisture-resistant doors, veneer, and sealant. Free estimates for one vanity or several.
Ask about Commercial Cabinet Refacing
Tell us about the project and how to reach you.